LTMR100CBD Schneider Electric Industrial Automation Components

Product Details

• Maximum Operating Rate
  1800 cyc/h
• Product Name
  TeSys T
• Measurement Current
  5…100 A
• Device Short Name
  LTMR
• Current State 0 Guaranteed
  Logic input < 5 V <= 15 mA 5 ms
• Width
  3.58 in (91 mm)
• Compatibility Code
  LTMR
• Range
  TeSys
• Current State 1 Guaranteed
  Logic input < 15 V 2...15 mA 15 ms
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• Net Weight
  1.17 lb(US) (0.53 kg)
• Maximum Output Switching Frequency
  2 Hz
• Connection Pitch
  0.20 in (5.08 mm)
• Depth
  4.82 in (122.5 mm)
• Product Or Component Type
  Motor controller
• [Us] Rated Supply Voltage
  24 V DC
• Communication Port Protocol
  CANopen
• Logic Input Number
  6
• Height
  2.40 in (61 mm)
• Supply Voltage Limits
  20.4…26.24 V DC
Input Current
7 mA
Pollution Degree
3
Device Application
Equipment monitoring and control
Web Services
Web server
Current Consumption
56...127 mA
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Overvoltage Category
III
Bus Type
CANopen ISO 1198 1...127 10...1000 kbit/s, SUB-D 9 4 twisted shielded pairs cable CANopen ISO 1198 1...127 10...1000 kbit/s, terminal block 4 twisted shielded pairs cable
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
[Uimp] Rated Impulse Withstand Voltage
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Imbalance current Earth-fault current Temperature Phase current I1, I2, I3 RMS Average current Iavg
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02
Network And Machine Diagnosis Type
Motor control command recording Trip context information Starting current and time Event recording Fault recording Remaining operating time before overload tripping Phase fault and earth fault trip counters Waiting time
Protection Type
Thermal protection Reverse polarity protection Phase unbalance Phase failure Overload (long time) Thermal overload protection Load fluctuation Power factor variation Earth-leakage protection Locked rotor O

LTMR100CBD Related Documents