LTMR08MBD Schneider Electric Industrial Automation Components

Product Details

• Supply Voltage Limits
  20.4…26.24 V DC
• Overvoltage Category
  III
• Net Weight
  1.17 lb(US) (0.53 kg)
• Measurement Current
  0.4…8 A
• Product Or Component Type
  Motor controller
• Communication Port Protocol
  Modbus
• Maximum Output Switching Frequency
  2 Hz
• Width
  3.58 in (91 mm)
• Product Name
  TeSys T
• Input Current
  7 mA
• Web Services
  Web server
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• Device Short Name
  LTMR
• Logic Input Number
  6
• Pollution Degree
  3
• Compatibility Code
  LTMR
• [Us] Rated Supply Voltage
  24 V DC
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
• Current State 0 Guaranteed
  Logic input < 5 V <= 15 mA 5 ms
• Height
  2.40 in (61 mm)
Current Consumption
56...127 mA
Range
TeSys
Device Application
Equipment monitoring and control
Current State 1 Guaranteed
Logic input < 15 V 2...15 mA 15 ms
Depth
4.82 in (122.5 mm)
Maximum Operating Rate
1800 cyc/h
Connection Pitch
0.20 in (5.08 mm)
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Bus Type
Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
[Uimp] Rated Impulse Withstand Voltage
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Average current Iavg Earth-fault current Phase current I1, I2, I3 RMS Imbalance current Temperature
Network And Machine Diagnosis Type
Running hours counter/operating time Trip history information Phase fault and earth fault trip counters Fault recording Waiting time after overload tripping Remaining operating time before overload tripping Trip context infor
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
Protection Type
Phase unbalance Locked rotor Power factor variation Load fluctuation Overload Overload (long time) Phase failure Thermal protection Thermal overload protection Earth-leakage protection Reverse polarity pro

LTMR08MBD Related Documents