LTMR100MFM Schneider Electric Industrial Automation Components

Product Details

• Product Or Component Type
  Motor controller
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
• Product Name
  TeSys T
• Measurement Current
  5…100 A
• Maximum Operating Rate
  1800 cyc/h
• Width
  3.58 in (91 mm)
• Device Application
  Equipment monitoring and control
• Logic Input Number
  6
• Supply Voltage Limits
  93.5…264 V AC
• Range
  TeSys
• Communication Port Protocol
  Modbus
• Current State 1 Guaranteed
  Logic input 79...264 V >= 2 mA 25 ms
• Net Weight
  1.17 lb(US) (0.53 kg)
• Maximum Output Switching Frequency
  2 Hz
• Overvoltage Category
  III
• Current Consumption
  8...62.8 mA
• Device Short Name
  LTMR
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Compatibility Code
  LTMR
• Depth
  4.82 in (122.5 mm)
Current State 0 Guaranteed
Logic input 0...40 V <= 15 mA 25 ms
Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Pollution Degree
3
Connection Pitch
0.20 in (5.08 mm)
Web Services
Web server
Height
2.40 in (61 mm)
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Bus Type
Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs
Input Current
3.1 mA 100 V 7.5 mA 240 V
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Temperature Earth-fault current Average current Iavg Imbalance current Phase current I1, I2, I3 RMS
Network And Machine Diagnosis Type
Motor control command recording Starting current and time Trip history information Phase fault and earth fault trip counters Running hours counter/operating time Remaining operating time before overload tripping Fault recordi
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02
Protection Type
Load fluctuation Earth-leakage protection Overload (long time) Overload Locked rotor Thermal protection Thermal overload protection Power factor variation Reverse polarity protection Phase failure Phase un

LTMR100MFM Related Documents