LTMR27MFM Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Reverse polarity protection Overload (long time) Earth-leakage protection Phase unbalance Overload Load fluctuation Phase failure Power factor variation Thermal protection Locked rotor Thermal overload pro
• Network And Machine Diagnosis Type
  Fault recording Starting current and time Remaining operating time before overload tripping Waiting time after overload tripping Motor control command recording Event recording Trip history information Running hours coun
• Measurement Accuracy
  5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
• Metering Type
  Temperature Phase current I1, I2, I3 RMS Average current Iavg Earth-fault current Imbalance current
• Electromagnetic Compatibility
  Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
• [Uimp] Rated Impulse Withstand Voltage
  4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
• Connections - Terminals
  Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
• [Ui] Rated Insulation Voltage
  690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
• Load Current
  5 A 250 V AC logic output 5 A 30 V DC logic output
• Bus Type
  Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs
• Associated Fuse Rating
  4 A gG output 0.5 A gG control circuit
• Contacts Type And Composition
  1 NO + 1 NC fault signal 3 NO
• Permissible Power
  480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
• Input Current
  3.1 mA 100 V 7.5 mA 240 V
• Connection Pitch
  0.20 in (5.08 mm)
• Net Weight
  1.17 lb(US) (0.53 kg)
• Web Services
  Web server
• Depth
  4.82 in (122.5 mm)
• Height
  2.40 in (61 mm)
• Compatibility Code
  LTMR
Width
3.58 in (91 mm)
Pollution Degree
3
Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Overvoltage Category
III
Current State 1 Guaranteed
Logic input 79...264 V >= 2 mA 25 ms
Maximum Output Switching Frequency
2 Hz
Maximum Operating Rate
1800 cyc/h
Current State 0 Guaranteed
Logic input 0...40 V <= 15 mA 25 ms
Logic Input Number
6
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Communication Port Protocol
Modbus
Current Consumption
8...62.8 mA
Measurement Current
1.35…27 A
Device Short Name
LTMR
Supply Voltage Limits
93.5…264 V AC
Product Or Component Type
Motor controller
Range
TeSys
Product Name
TeSys T
Device Application
Equipment monitoring and control
[Us] Rated Supply Voltage
100...240 V AC 50/60 Hz

LTMR27MFM Related Documents