LTMR27EFM Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Phase unbalance Earth-leakage protection Thermal protection Reverse polarity protection Power factor variation Overload Load fluctuation Locked rotor Thermal overload protection Phase failure Overload (lon
• Measurement Accuracy
  5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
• Network And Machine Diagnosis Type
  Event recording Trip context information Phase fault and earth fault trip counters Trip history information Waiting time after overload tripping Fault recording Remaining operating time before overload tripping Starting
• Metering Type
  Average current Iavg Phase current I1, I2, I3 RMS Imbalance current Earth-fault current Temperature
• Electromagnetic Compatibility
  Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
• Connections - Terminals
  Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
• [Uimp] Rated Impulse Withstand Voltage
  4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
• [Ui] Rated Insulation Voltage
  690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
• Permissible Power
  480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
• Load Current
  5 A 250 V AC logic output 5 A 30 V DC logic output
• Contacts Type And Composition
  1 NO + 1 NC fault signal 3 NO
• Associated Fuse Rating
  4 A gG output 0.5 A gG control circuit
• Input Current
  3.1 mA 100 V 7.5 mA 240 V
• Compatibility Code
  LTMR
• Web Services
  Web server
• Net Weight
  1.17 lb(US) (0.53 kg)
• Depth
  4.82 in (122.5 mm)
• Height
  2.40 in (61 mm)
• Width
  3.58 in (91 mm)
• Pollution Degree
  3
Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Connection Pitch
0.20 in (5.08 mm)
Overvoltage Category
III
Maximum Operating Rate
1800 cyc/h
Maximum Output Switching Frequency
2 Hz
Current State 1 Guaranteed
Logic input 79...264 V >= 2 mA 25 ms
Current State 0 Guaranteed
Logic input 0...40 V <= 15 mA 25 ms
Logic Input Number
6
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Communication Port Protocol
Modbus TCP/EtherNet/IP
Bus Type
Ethernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs
Device Short Name
LTMR
Device Application
Equipment monitoring and control
Product Or Component Type
Motor controller
Supply Voltage Limits
93.5…264 V AC
Measurement Current
1.35…27 A
Current Consumption
8...62.8 mA
Product Name
TeSys T
[Us] Rated Supply Voltage
100...240 V AC 50/60 Hz
Range
TeSys

LTMR27EFM Related Documents