LTMR08MFM Schneider Electric Industrial Automation Components

Product Details

• Product Or Component Type
  Motor controller
• Maximum Operating Rate
  1800 cyc/h
• Net Weight
  1.17 lb(US) (0.53 kg)
• Device Application
  Equipment monitoring and control
• Supply Voltage Limits
  93.5…264 V AC
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
• Compatibility Code
  LTMR
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Width
  3.58 in (91 mm)
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• Device Short Name
  LTMR
• Current Consumption
  8...62.8 mA
• Logic Input Number
  6
• Maximum Output Switching Frequency
  2 Hz
• Height
  2.40 in (61 mm)
• Range
  TeSys
• Current State 1 Guaranteed
  Logic input 79...264 V >= 2 mA 25 ms
• Product Name
  TeSys T
• Communication Port Protocol
  Modbus
• Overvoltage Category
  III
Depth
4.82 in (122.5 mm)
Measurement Current
0.4…8 A
Current State 0 Guaranteed
Logic input 0...40 V <= 15 mA 25 ms
Connection Pitch
0.20 in (5.08 mm)
Web Services
Web server
Pollution Degree
3
Bus Type
Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs
Input Current
3.1 mA 100 V 7.5 mA 240 V
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Average current Iavg Temperature Earth-fault current Imbalance current Phase current I1, I2, I3 RMS
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
Network And Machine Diagnosis Type
Event recording Fault recording Waiting time after overload tripping Running hours counter/operating time Phase fault and earth fault trip counters Trip context information Starting current and time Motor control command
Protection Type
Reverse polarity protection Locked rotor Earth-leakage protection Thermal overload protection Phase failure Overload Thermal protection Power factor variation Load fluctuation Phase unbalance Overload (lon

LTMR08MFM Related Documents