LTMR100CFM Schneider Electric Industrial Automation Components

Product Details

• Device Application
  Equipment monitoring and control
• Product Name
  TeSys T
• Maximum Output Switching Frequency
  2 Hz
• Web Services
  Web server
• Width
  3.58 in (91 mm)
• Device Short Name
  LTMR
• Supply Voltage Limits
  93.5…264 V AC
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Current State 1 Guaranteed
  Logic input 79...264 V >= 2 mA 25 ms
• Pollution Degree
  3
• Range
  TeSys
• Current State 0 Guaranteed
  Logic input 0...40 V <= 15 mA 25 ms
• Connection Pitch
  0.20 in (5.08 mm)
• Compatibility Code
  LTMR
• Product Or Component Type
  Motor controller
• Maximum Operating Rate
  1800 cyc/h
• Measurement Current
  5…100 A
• Communication Port Protocol
  CANopen
• Height
  2.40 in (61 mm)
• Logic Input Number
  6
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Current Consumption
8...62.8 mA
Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Overvoltage Category
III
Net Weight
1.17 lb(US) (0.53 kg)
Depth
4.82 in (122.5 mm)
Input Current
3.1 mA 100 V 7.5 mA 240 V
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Bus Type
CANopen ISO 1198 1...127 10...1000 kbit/s, SUB-D 9 4 twisted shielded pairs cable CANopen ISO 1198 1...127 10...1000 kbit/s, terminal block 4 twisted shielded pairs cable
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Earth-fault current Phase current I1, I2, I3 RMS Imbalance current Temperature Average current Iavg
Network And Machine Diagnosis Type
Event recording Trip history information Starting current and time Running hours counter/operating time Motor control command recording Remaining operating time before overload tripping Fault recording Phase fault and ea
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02
Protection Type
Thermal protection Locked rotor Phase failure Earth-leakage protection Overload (long time) Power factor variation Phase unbalance Load fluctuation Thermal overload protection Reverse polarity protection O

LTMR100CFM Related Documents