250-114/000-006 WAGO Terminal Blocks

WAGO 250-114/000-006 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 160V in overvoltage category III/2 and 320V in category II/2, with a rated impulse voltage of 2.5kV for both categories. The rated current is 8A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for the same groups. This part includes 14 connection points and supports a single connection type with one level, utilizing Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with specific sizes for ferruled conductors. The strip length for connections is between 8.5 and 9.5mm, and the conductor connection direction to PCB is 45 degrees. It has a pole number of 14, pin spacing of 3.5mm, dimensions of 50.5mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth. The solder pin length is 3.4mm, with dimensions of 0.4 x 0.75mm and a drilled hole diameter of 1.1mm (+0.1). The terminal strip is designed for THT PCB contacts with an in-line solder pin arrangement and one solder pin per potential. It is made from blue Polyamide (PA66), with a copper alloy clamping spring, tin contact plating, and meets the UL94 V0 flammability class. The part weighs 6.5g and has a fire load of 0.146MJ. It operates within a temperature range of -60 to +105°C. Packaged in boxes, it comes in quantities of 80 (20 pcs per unit) and is RoHS compliant without exemptions. The product's country of origin is CH, with a GTIN of 4044918647861 and a customs tariff number of 85369010000.