LTMR100EBD Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Locked rotor Overload Thermal overload protection Earth-leakage protection Reverse polarity protection Overload (long time) Power factor variation Phase unbalance Load fluctuation Phase failure Thermal pro
• Network And Machine Diagnosis Type
  Fault recording Trip context information Waiting time after overload tripping Trip history information Running hours counter/operating time Motor control command recording Starting current and time Phase fault and earth
• Measurement Accuracy
  5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02
• Metering Type
  Average current Iavg Earth-fault current Temperature Phase current I1, I2, I3 RMS Imbalance current
• Electromagnetic Compatibility
  Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
• [Uimp] Rated Impulse Withstand Voltage
  6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1
• Connections - Terminals
  Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
• [Ui] Rated Insulation Voltage
  690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
• Permissible Power
  480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
• Associated Fuse Rating
  4 A gG output 0.5 A gG control circuit
• Contacts Type And Composition
  1 NO + 1 NC fault signal 3 NO
• Load Current
  5 A 250 V AC logic output 5 A 30 V DC logic output
• Web Services
  Web server
• Compatibility Code
  LTMR
• Net Weight
  1.17 lb(US) (0.53 kg)
• Height
  2.40 in (61 mm)
• Width
  3.58 in (91 mm)
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• Pollution Degree
  3
• Connection Pitch
  0.20 in (5.08 mm)
Depth
4.82 in (122.5 mm)
Overvoltage Category
III
Maximum Operating Rate
1800 cyc/h
Maximum Output Switching Frequency
2 Hz
Current State 1 Guaranteed
Logic input < 15 V 2...15 mA 15 ms
Current State 0 Guaranteed
Logic input < 5 V <= 15 mA 5 ms
Logic Input Number
6
Input Current
7 mA
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Communication Port Protocol
Modbus TCP/EtherNet/IP
Bus Type
Ethernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs
Supply Voltage Limits
20.4…26.24 V DC
Current Consumption
56...127 mA
[Us] Rated Supply Voltage
24 V DC
Measurement Current
5…100 A
Device Application
Equipment monitoring and control
Product Or Component Type
Motor controller
Device Short Name
LTMR
Product Name
TeSys T
Range
TeSys

LTMR100EBD Related Documents